Product Description
[:hu]KARKÖTÖZŐ[:en]arm restraints[:]
275,8 EUR
[:hu]TÉRD- ÉS KÖNYÖKVÉDŐ[:en]knee and elbow protector[:]
213,3 EUR
38,5 EUR
The gag ball is 40mm wide and is made of medical silicone. The straps are made of two layers of leather: the outside is strong and thick while the inside is soft for comfortable use and the buckle can be locked.
If you have questions or would like to order please contact me in one of the ways found on CONTACTS page.
Locks are not included.
Categories: HEAD HARNESSES, RESTRAINTS
Description
The gag ball is 40mm wide and is made of medical silicone. The straps are made of two layers of leather: the outside is strong and thick while the inside is soft for comfortable use and the buckle can be locked.
If you have questions or would like to order please contact me in one of the ways found on CONTACTS page.
Locks are not included.
Termékkategóriák
- FLOGGERS AND SPANKING DEVICES (22)
- FOR THE WEEKDAYS AND PARTY ACCESSORIES (22)
- FOR THE HEAD (48)
- MASKS (19)
- HEAD HARNESSES (17)
- MUZZLES (10)
- others for the head (3)
- CUFFS (114)
- RESTRAINTS (30)
- HARNESSES (37)
- PETPLAY (16)
- SPIKED AND STUDDED THINGS (13)
Related Products
I make this mouth cover from three layers of soft cowhide so it doesn’t push the head anywhere, but it holds strong enough. The gags are made of silicone; the inside is 5.5 cm long and the outside is 13 cm long. The buckle for locking and adjusting the length of the strap can be locked. (The padlock is not included in the product.)
If you have questions or would like to order please contact me in one of the ways found on CONTACTS page.
Locks are not included.
87,3 EUR
I made this swing from 4.5 mm thick, one layer of cowhide. I worked the edge with a red cowhide hem. You can secure the swing with 5 solid, 5 cm wide welded D-rings.
Size: 105 cm long, 75 cm wide.
The product does not contain carabiners and chains.
If you have questions or would like to order please contact me in one of the ways found on CONTACTS page.
463,6 EUR
A neck brace that holds the chin and neck from all sides. It is 1.5-2 mm thick, strong on the outside and soft but also strong cowhide on the inside, with a thin layer of sponge between the two to make it as comfortable as possible. The hem on this piece is black leather, but you can order it in other colors (I currently have red, white and blue leather). I put welded D-rings on the front and on two sides. You can adjust the length with 2 pieces of 3 cm wide lockable buckles. The rivets holding the chin, D-rings and buckles are covered with sponge and soft leather so that they do not come in contact with the wearer's skin.
If you have questions or would like to order please contact me in one of the ways found on CONTACTS page.
Locks are not included.
135,8 EUR
You can use it as an accessory for a simple outfit, but it can stand its ground without a dress. It is also an excellent tying tool. Its main feature is the design of the spine. Thanks to the replaceable lumbar part and the detachable bib, anyone can wear it.
The straps connecting the individual parts can be removed, so that each part can be used independently. You get much more for the price of one product.
The standard size can be adjusted up to S-XL, but of course you can order a different size.
I made the piece in the photos from high-gloss black cowhide, but I also can make it from other leathers.
General characteristics of the harness: The straps are each two layers of high-gloss cowhide; their width is 3 and 4 cm. The length of the narrower ones can be adjusted with a buckle; the D-rings are welded everywhere.
Parts of the harness:
567 EUR
- A pair of arm bindings consisting of 1-1 vertical and 5-5 horizontal straps. The total number of welded D-rings is 14.
- A pair of leg bindings consisting of 4-4 vertical and 7-7 horizontal straps. The total number of welded D-rings is 44.
- chest harness with dragon spine
- detachable women's panties
- removable bib
- detachable men's bottom
- 1 waist belt with two sliding D-rings
- 8 detachable connecting straps that prevent the individual parts from slipping off. or allows each part to be used separately.
This bracelet consists of 1-1 vertical and 5-5 horizontal straps. Each of these straps is made of two layers of cowhide, the outer layer of which is thick and strong and the inside is soft but also strong. The vertical straps are 4 cm wide and have D-ring on both ends. The horizontal straps are 3 cm wide and can be adjusted with a buckle. I also attach D-rings to the straps so that the arms can be fastened to each other or turned outwards to an external object.
I also recommend it for fetish parties where it can be a great accessory for your outfit.
Photos taken: https://www.facebook.com/FetishExtremePictureBest/
Mistress: www.szexakademia.com
The rope shown in the pictures is not included.
120 EUR
I make this mouthpiece from three layers of leather: the outer and inner 1-1.5mm thick medium soft cowhide and the middle sheepskin. It doesn't push the head anywhere, but he keeps it firm enough. It is 10 cm wide at the mouth and 4 cm at the nape of the neck. Its length can be adjusted with a buckle.
The length of the gag shown in the pictures is 5 cm, but you can also order with a 9 cm one. A welded D-ring attached at the mouth allows you to tie or guide your sub on a leash.
If you have questions or would like to order please contact me in one of the ways found on CONTACTS page.
106,7 EUR
These mitts are padded with thick sponge around the hands and thin sponge around the forearms. The mitts are made of leather on both the inside and the outside with an extra long forearm part. It holds the hands tightly via the drawstring wound between the rings and two extra strong lockable leather straps that each have a d-ring as well. The design does not allow its wearer to use their hands: they only fit if the person makes a fist in it.
Main photo: https://www.facebook.com/FetishExtremePictureBest/
185,8 EUR
The outside is made of thick leather while the inside is soft leather with soft padding, that can be adjusted to fit with straps and a string. And the most important: the inner and outsides each contain a 3mm thick, 3 cm wide piece of steel (4 pieces altogether) which makes it impossible to bend the legs. It is as if it was bound in plaster. Every strap can be locked and each has 2 welded D rings fitted to the inner and outside of the leg.
Photó: https://www.facebook.com/FetishExtremePictureBest/
Two soft leather arm restraints with 4 thick leather straps. Each strap has three d-rings of which one is located at the fingers. The tunnels are designed so that the straps and the rings fit through them. Easy to use and the ability to bend the arms is ensured by the soft leather that I used for the elbow area. Its designs makes a number of binding possible such as:
275,8 EUR
- behind the back with the x-binder.
- It also functions as an arm bag with the x binder and a strap on the wrists (the wrist straps can be taken off while the forearm straps are long enough to clasp both wrists).
- You can bind the arms together behind the person's back or in front.
- If you tie the two rings at the fingers the device becomes a straitjacket.
- The wrist can be tied to the thighs.
- You can bind the arms along the body with straps.
- You can bind the arms to the ankles or to the neck with extra handcuffs.
- The above variations can be multiplied if you add restraints to external objects.
- with the X-strap, thigh and straitjacket straps 230,6 €
- with the above plus the body straps 275,8 €
Compared to the tying socks presented earlier, this is a much more complicated, and therefore more time-consuming design. The end result, however, speaks for itself. It follows the shape of the foot much more precisely and is much more comfortable to wear thanks to the 5 mm thick polyfoam and buttery soft cowhide material built into the sole. The closure is provided by a removable strap attached to the ankle and a zipper sewn into the top; both can be locked. I sew a pad made of sheepskin under the zipper. On the ankle strap 3 and on the toes 1 welded D-ring allows several types of tying.
Locks are not included.
Model photo: https://www.facebook.com/FetishExtremePictureBest/
207,3 EUR
This device is made of soft black cowleather that can be fastened to the arms and body via a drawstring and four leather straps. Its impossible for the wearer to get out of it and the hands are positioned with palms pressed together in it. There’s a d-ring at the tips of the fingers with which it can also be fastened to objects.
Model photo: https://www.facebook.com/FetishExtremePictureBest/
275,8 EUR
The outer layer of the mouthpiece and the strap are 4mm thick natural cowhide; the kind that ripens with use. And I put soft white cowhide on the mouth, folding the edges so as not to rub against the wearer’s facial skin. You can adjust the length with a buckle.
If you have questions or would like to order please contact me in one of the ways found on CONTACTS page.
70,3 EUR
It is made of two layers of leather, the outside of which is thicker, firmer, while the inside is soft cowhide to make it comfortable to wear. The straps are also made of two layers of leather; you can adjust the length with a buckle.
If you have questions or would like to order please contact me in one of the ways found on CONTACTS page.
62,7 EUR
General characteristics of the bandages: The straps are each two layers of cowhide, the outside of which is thick and strong, and the inside of which is soft but also strong of leather. The vertical straps are 4 cm wide and I put a welded D-ring to both ends. The horizontal straps are 3 cm wide and their length can be adjusted with a buckle. I also attach welded D-rings to the connection of the straps. All of these provide countless tying options. Parts of the set:
366,7 EUR
- A pair of arm bindings consisting of 1-1 vertical and 5-5 horizontal straps. The total number of welded D-rings is 14.
- A pair of leg bindings consisting of 4-4 vertical and 7-7 horizontal straps. The total number of welded D-rings is 44.
- 1 waist belt with two sliding D-rings
- 6 connecting straps that prevent the individual parts from slipping off. These connecting straps are made of one layer of leather so that they can be easily bent.
- 1 X-connector
- 4 pcs double carabiner
The outside is made of thick leather while the inside is soft leather with soft padding, that can be adjusted to fit with straps and a string. And the most important: the inner and outsides each contain a 3mm thick, 3 cm wide piece of steel (4 pieces altogether) which makes it impossible to bend the legs. It is as if it was bound in plaster. Every strap can be locked and each has 2 welded D rings fitted to the inner and outside of the leg.
Photó: https://www.facebook.com/FetishExtremePictureBest/
557,6 EUR
This leg band consists of 4-4 vertical and 7-7 horizontal straps. The straps are each made of two layers of cowhide, the outside of which is thick and strong, and the inside of which is soft but also strong leather. The vertical straps are 4 cm wide and I put welded D-rings to each end, a total of 16 pieces. The horizontal straps are 3 cm wide and their length can be adjusted with a buckle. I also attach welded D-rings to the connection of the straps, a total of 28 pieces. All of these provide countless tying options. The bandage also includes a waist belt and a total of 6 connecting straps, which prevent the individual parts from slipping off. These connecting straps are made of one layer of leather so that they can be easily bent.
Model photó: https://www.facebook.com/FetishExtremePictureBest/
Domina: www.szexakademia.com
285,8 EUR