Dog head harness with nose, tongue and buckles that can be locked: The straps are 3 cm wide and are made of two layers of cowhide, the outer layer being thicker, strong leather and the inner layer soft but also strong. The ears are made of soft leather and I put wire around the edges so you can fold it as you like. The nose is soft on the inside and moderately thick on the outside to help maintain its shape. I work the mouth opening and the edge with seam. The height of the mouth opening is designed so that the mouth remains usable. You can patent or remove the “dog” tongue for two lengths. All buckles can be locked. (The padlock shown in the pictures is not included) Photo: https://www.facebook.com/FetishExtremePictureBest/ Dog harness

I DESIGNED THIS DOG HARNESS TO BE USED ONLY AS A FOOT BINDING AND ALSO AS A BUCKLE BINDING THE WHOLE BODY. The extra dog harness includes: The outer layer of the knees and elbows is 2 mm thick cowhide, which is sewn with anti-slip rubber on the “walking surface”. The inner side is lined with 12 mm thick sponge and soft cowhide. Thanks to the one-piece joint protectors, there is no part that pushes the knees or elbows. Stable attachment is ensured by a 3 cm wide two-layer leather strap around the upper edges. The lateral sliding of the limbs is prevented by the 4-4 straps connecting the joint protectors to the foot and arm. Those part, which fixed the upper part of the leg, with the thigh, and the forearm on the upper arm, is also covered with a 2 mm thick cowhide and a 3 mm thick sponge with a soft cow lining. At the same time, the lining also covers the rivets that secure the straps and buckles to the outside. The size of this can be adjusted to the desired tightness with the two-sided lacing and the two-layer leather strap around the top. The foot section consists of two adjustable length straps lined with sponge and soft leather and a stably fastened D-ring. The strap running through the heels keeps the knees and legs at the right height. The strap on the foot prevents the heel strap from sliding backwards when using the full body harness. A half ring placed in the center of the heel strap secures the body straps of the entire harness. I make soft but strong cowhide gloves. You can attach it to the forearm with an adjustable strap. This strap is attached to the body straps, tucked through the guides on the headpiece and the D-ring at the end of the sleeves. You can also strap wrist straps to prevent them from slipping. You can use gloves as an independent toy. The straps are made of two layers of cowhide everywhere, the outer layer of which is ca. 2mm thick, strong cowhide, and the inside is soft but also strong cowhide. Behind the thick, massive buckles, I riveted hand-sewn leather loops everywhere, and, where necessary, made a sliding loop. Each strap is adjustable in length, allowing the harness to be precisely sized. This model is adjustable up to S-XXXL size, but of course I am happy to make a different size (in this case the price may vary). You can also order with nickel and black metal parts. The gloves and headbands shown in the pictures are not included in the price, you can order them separately. You can find the sponged fist mitts here, the long fist here, the muzzle here, the dog head harness here and the dog's head here. Photo: https://www.facebook.com/FetishExtremePictureBest/ Domina: https://www.facebook.com/inkedluca/

The extra dog harness includes: The outer layer of the knees and elbows is 2 mm thick cowhide, which is sewn with anti-slip rubber on the “walking surface”. The inner side is lined with 12 mm thick sponge and soft cowhide. Thanks to the one-piece joint protectors, there is no part that pushes the knees or elbows. Stable attachment is ensured by a 3 cm wide two-layer leather strap around the upper edges. The lateral sliding of the limbs is prevented by the 4-4 straps connecting the joint protectors to the foot and arm. Those part, which fixed the upper part of the leg, with the thigh, and the forearm on the upper arm, is also covered with a 2 mm thick cowhide and a 3 mm thick sponge with a soft cow lining. At the same time, the lining also covers the rivets that secure the straps and buckles to the outside. The size of this can be adjusted to the desired tightness with the two-sided lacing and the two-layer leather strap around the top. The "socks" are soft but strong cowhide. The strap guides on the top and bottom of the foot and the welded D-rings attached to the toes and heel allow you to fasten the foot either in a pinch or in normal position. I put a thin sponge underneath the D-ring at the toes, to prevent the strap running there. You can also tie these two D-rings with an extra strap. The ankle strap is also held in place by belt guides. You can attach the socks to the leg with an adjustable length strap. The link is designed so that the socks can be used as a separate toy, regardless of the dog harness. I also make soft but strong cowhide gloves. Like the sock section, you can attach it to the forearm with an adjustable strap. This strap is attached to the body straps, tucked through the guides on the headpiece and the D-ring at the end of the sleeves. You can also strap wrist straps to prevent them from slipping. Like socks, you can use gloves as an independent toy. The straps are made of two layers of cowhide everywhere, the outer layer of which is ca. 2mm thick, strong cowhide, and the inside is soft but also strong cowhide. Behind the thick, massive buckles, I riveted hand-sewn leather loops everywhere, and, where necessary, made a sliding loop. Each strap is adjustable in length, allowing the harness to be precisely sized. This model is adjustable up to S-XXL size, but of course I am happy to make a different size (in this case the price may vary).

Pony-play bridle with ears, visors, possibly mane: The straps are 3 cm wide, made of two layers of cowhide, of which the outer layer is thicker, strong leather, and the inner is soft but also strong. All buckles can be locked. The visor is a single layer of 4 mm thick cowhide. I designed it to block peripheral vision at any size head. I make the ear out of soft leather; I put wire on the edge for better support. The snaffle is a soft rubber pony snaffle, but you can ask for it with a different mouthpiece or you can send me the piece you want. You can also request a mane made of leather for the strap running from forehead to neck. The price of the bridle without a mane is 163,4 EUR Model photos: https://www.facebook.com/FetishExtremePictureBest/   Model photos: https://www.facebook.com/FetishExtremePictureBest/ Locks are not included. If you have questions or would like to order please contact me in one of the ways found on CONTACTS page.

Extra leggings are provided by: The outer layer of the knee section is 2 mm thick cowhide, which is sewn on the “tread” with non-slip rubber. The inside is lined with a 12 mm thick sponge and soft cowhide. Thanks to the one-piece knee guard, there is no part that presses the knee. A 3 cm wide, two-layer leather strap wraps around the upper edge for a stable attachment. The outside of the leg joining the thigh is also 2 mm thick cowhide and inside is 3 mm thick sponge and soft cowhide lining. The lining also covers the rivets that fasten the straps and buckles to the outside. You can adjust the size to the desired tightness with the corset on both sides or the two-layer leather strap around the top. The ankle grip is shaped like my cuffs in general: the 6 cm wide main body is covered with thick leather on the outside, lined with 3mm sponge and soft leather. The outer strap is 3 cm wide and has two layers of leather. I make the strap on the sole more comfortable with a 3mm thick sponge and soft leather. Each part of the harness is adjustable in size, making it almost any size. The design ensures comfortable wearing for hours on end. Model photos taken: https://www.facebook.com/FetishExtremePictureBest/ Mistress: www.szexakademia.com

These mitts are padded with thick sponge around the hands and thin sponge around the forearms. The mitts are made of leather on both the inside and the outside with an extra long forearm part. It holds the hands tightly via the drawstring wound between the rings and two extra strong lockable leather straps that each have a d-ring as well. The design does not allow its wearer to use their hands: they only fit if the person makes a fist in it. Main photo: https://www.facebook.com/FetishExtremePictureBest/