Showing 1–12 of 28 results
Thick, strong, and soft but also strong cowhide chest harness on the inside. Each strap is 4 cm wide and can be adjusted in length with a buckle. The neck straps can be slid on the chest strap, so you can turn the latter buckle forward or to the spine. If you have questions or would like to order please contact me in one of the ways found on CONTACTS page.
I make this model from 4 cm wide straps; their length is adjustable. The outer layer of the straps is 1.5-2 mm thick cowhide, under which I sew two layers of soft cowhide with folded edges, which on the one hand makes the harness comfortable to wear and on the other hand covers the screws holding the spikes. I put 10-10 special, curved spikes on each long strap of the harness. If you have questions or would like to order please contact me in one of the ways found on CONTACTS page.
Each strap on the underwear is made of two layers of leather, of which the outer is 1.5-2 mm thick, harder cowhide, and the inner is soft but also strong cowhide. All strap connections can be locked, which is provided by special metal pins mounted behind the buckle (the product does not include padlocks). The underwear parts are as follows: 1 piece of 3 cm wide waist belt divided into several pieces, 2 pieces of 3 cm wide bottom lifting thigh straps, bottom strap with 3 rings of different sizes (for penis, testicles, anus, you can determine their size), bottom strap with 1 ring (penis + testicles) and an expanding part for an inflatable anal plug, cover part made of two layers of soft cowhide. The price applies to the underwear with the listed content. If you want fewer accessories or other bottom straps, ask for a quote. If you have questions or would like to order please contact me in one of the ways found on CONTACTS page.
I make this harness from medium hard, one layer, 2 mm thick black cowhide. The length of the arm, shoulder and chest straps can be adjusted. I cut the chest part and the shoulder strap into one piece, which ensures a comfortable fit. Metal accessories (rivets, buckles) are also black. If you have questions or would like to order please contact me in one of the ways found on CONTACTS page.
On this harness, the outer layer is about 2 mm thick cowhide, under which I put soft white cowhide folded into two layers. The inner diameter of the side rings is 5 cm and the half ring in the middle of the front is 3 cm. You can adjust the length of the straps with buckles. You can order in many different color combinations. If you have questions or would like to order please contact me in one of the ways found on CONTACTS page. The white mask on some of pictures is here. Model photo: https://www.facebook.com/FetishExtremePictureBest/
I make this panty entirely from three layers of soft red cowhide. This way it retains its softness, but is also durable enough. The whole panties can be locked with two padlocks (padlocks are not included in the product), the length of each strap can be adjusted. Parts of the panties: - 1 piece of 4 cm wide waist belt, - 1 piece of 4 cm wide bottom strap with stimulating conical rivets, cut out for the tail, - 1 piece of 4 cm wide penalty bottom strap with three row, a total of 52 spikes from the pubic mound to the vagina, cut out at the buttocks for the tail, - 1 piece 3 cm wide flat bottom strap, - 2 piece of 45mm diameter lockable plug holders The price applies to panties with the listed contents. If you want fewer accessories or other bottom straps, ask for a quote.
You can use it as an accessory for a simple outfit, but it can stand its ground without a dress. It is also an excellent tying tool. Its main feature is the design of the spine. Thanks to the replaceable lumbar part and the detachable bib, anyone can wear it. The straps connecting the individual parts can be removed, so that each part can be used independently. You get much more for the price of one product. The standard size can be adjusted up to S-XL, but of course you can order a different size. I made the piece in the photos from high-gloss black cowhide, but I also can make it from other leathers. General characteristics of the harness: The straps are each two layers of high-gloss cowhide; their width is 3 and 4 cm. The length of the narrower ones can be adjusted with a buckle; the D-rings are welded everywhere. Parts of the harness:
- A pair of arm bindings consisting of 1-1 vertical and 5-5 horizontal straps. The total number of welded D-rings is 14.
- A pair of leg bindings consisting of 4-4 vertical and 7-7 horizontal straps. The total number of welded D-rings is 44.
- chest harness with dragon spine
- detachable women's panties
- removable bib
- detachable men's bottom
- 1 waist belt with two sliding D-rings
- 8 detachable connecting straps that prevent the individual parts from slipping off. or allows each part to be used separately.
I make this harness from three layers of soft white cowhide. It can also be a special piece of your “wardrobe” because of its shape and color. The chest straps are 3 cm wide and their length can be adjusted with a buckle. The two vertical straps are 2 cm wide and their length can be adjusted with a patent. You can hang the carabiners in the belt buckle of your pants, or you can take the whole strap off the harness. Of course you can order without the narrow straps, in this case the price is 70€.
On this type of harness the outer layer is about 3 mm thick, strong oxhide. Under this layer I put a doubled up soft sheepskin, with colour on request. I sew with a consistent coloured twist-yarn as the inner layer leather. On the picture I made it with blue inner layer, but you can order it with red, black, white and different shades of brown coloured leather.
You can wear this type of harness in two ways, because the lower strap can be removed, so you can use it as a chest harness. The straps are 3 cm wide, made of two layers of leather. The outer layer is a thicker, strong leather, and the inner one is soft, but strong as well. Every buckle and rivet are black.