I make this muzzle entirely by combining black and red leathers: - the black part is medium-thick, firm, strong cowhide everywhere, - the red parts are also made of cowhide, but soft. I fold them into two layers under the straps, and they have one layer inside the mouthpiece and collar. You can adjust the length of each strap with a lockable buckle (padlocks are not included in the product). I put a welded D-ring on the top of the head, under the chin and on the collar, for a total of six pieces. You can use the collar separately or in conjunction with the muzzle. If you have questions or would like to order please contact me in one of the ways found on CONTACTS page. Locks are not included.

The outside is made of thick leather while the inside is soft leather with soft padding, that can be adjusted to fit with straps and a string. And the most important: the inner and outsides each contain a 3mm thick, 3 cm wide piece of steel (4 pieces altogether) which makes it impossible to bend the legs. It is as if it was bound in plaster. Every strap can be locked and each has 2 welded D rings fitted to the inner and outside of the leg. Photó: https://www.facebook.com/FetishExtremePictureBest/

Parts of the arm back tying set: One piece of red leather studded, lockable neck cuff with 4 welded D-rings (details here). A pair of red leather studded, lockable wrist cuffs with 2 welded D-rings (details here). A piece of red leather decorated arm back tie made of 4 cm wide straps. The straps are made of two layers of cowhide, of which the outer layer is about 2mm thick, strong cowhide, and the inner is soft but also strong cowhide. The middle red stripe is sheepskin folded into two layers of the same one from which I cut the hem strips of the handcuffs. I make holes in the top strap along its entire length so that the arms can be pulled all the way up to the center of the back. The ring is welded, the buckles and carabiners are good strong. Of course, you can request another color combination. If you have questions or would like to order please contact me in one of the ways found on CONTACTS page.

Handcuffs with fist mitts. The cuffs have 3 welded d-rings, the mitts are made of a single layer of medium thick leather.  If you have questions or you want to order reach out to me in one of the ways found on the CONTACT page.

This leg band consists of 4-4 vertical and 7-7 horizontal straps. The straps are each made of two layers of cowhide, the outside of which is thick and strong, and the inside of which is soft but also strong leather. The vertical straps are 4 cm wide and I put welded D-rings to each end, a total of 16 pieces. The horizontal straps are 3 cm wide and their length can be adjusted with a buckle. I also attach welded D-rings to the connection of the straps, a total of 28 pieces. All of these provide countless tying options. The bandage also includes a waist belt and a total of 6 connecting straps, which prevent the individual parts from slipping off. These connecting straps are made of one layer of leather so that they can be easily bent. Model photó: https://www.facebook.com/FetishExtremePictureBest/ Domina: www.szexakademia.com

Leather pony-play bridle: each strap can be adjusted and taken apart. Comes with different types of bits (soft or hard rubber bits, rope bits covered with leather, gag ball), which you can either pick or get all of them. If you detach the 1m long end of the bridle you can also use it as a head harness. 129 € with one type of bit, 177,3 € with every bit type.

Description comming soon. If you have questions or would like to order please contact me in one of the ways found on CONTACTS page.

I made this swing from 4.5 mm thick, one layer of cowhide. I worked the edge with a red cowhide hem. You can secure the swing with 5 solid, 5 cm wide welded D-rings. Size: 105 cm long, 75 cm wide. The product does not contain carabiners and chains. If you have questions or would like to order please contact me in one of the ways found on CONTACTS page.

Parts of the harness: - 1 piece of 4 cm wide waistband with a D-ring at the back and with a buckle pad, - 1 pair of 4 cm wide thigh strap buckle pad, - 4 connecting straps - 1 patent ponytail made of 40 strips of leather of different lengths. The longest strip is about 70 cm long. The waistband, thigh straps are made of two layers of leather, the outer layer is 1.5-2 mm thick and strong, and the inner is soft but also strong cowhide. The connecting straps are made of a single layer of thicker cowhide. The harness without pony tail is 102 €. If you have questions or would like to order please contact me in one of the ways found on CONTACTS page.

This bracelet consists of 1-1 vertical and 5-5 horizontal straps. Each of these straps is made of two layers of cowhide, the outer layer of which is thick and strong and the inside is soft but also strong. The vertical straps are 4 cm wide and have D-ring on both ends. The horizontal straps are 3 cm wide and can be adjusted with a buckle. I also attach D-rings to the straps so that the arms can be fastened to each other or turned outwards to an external object. I also recommend it for fetish parties where it can be a great accessory for your outfit. Photos taken: https://www.facebook.com/FetishExtremePictureBest/ Mistress: www.szexakademia.com The rope shown in the pictures is not included.

You can use it as an accessory for a simple outfit, but it can stand its ground without a dress. It is also an excellent tying tool. Its main feature is the design of the spine. Thanks to the replaceable lumbar part and the detachable bib, anyone can wear it. The straps connecting the individual parts can be removed, so that each part can be used independently. You get much more for the price of one product. The standard size can be adjusted up to S-XL, but of course you can order a different size. I made the piece in the photos from high-gloss black cowhide, but I also can make it from other leathers. General characteristics of the harness: The straps are each two layers of high-gloss cowhide; their width is 3 and 4 cm. The length of the narrower ones can be adjusted with a buckle; the D-rings are welded everywhere. Parts of the harness:

• A pair of arm bindings consisting of 1-1 vertical and 5-5 horizontal straps. The total number of welded D-rings is 14.
• A pair of leg bindings consisting of 4-4 vertical and 7-7 horizontal straps. The total number of welded D-rings is 44.
• chest harness with dragon spine
• detachable women's panties
• removable bib
• detachable men's bottom
• 1 waist belt with two sliding D-rings
• 8 detachable connecting straps that prevent the individual parts from slipping off. or allows each part to be used separately.

The masks and leather socks shown in the pictures are not included in the product. Model photo: https://www.facebook.com/FetishExtremePictureBest/

A neck brace that holds the chin and neck from all sides. Thick cowhide on the outside and soft but also strong cowhide on the inside, with a thin layer of sponge between the two to make it as comfortable as possible. The hem on this piece is white leather, but you can order it in other colors (I currently have black, white, red and brown leather). I put welded D-rings on the front and on both sides. You can adjust its length with 2 pieces of 3 cm wide lockable buckles. The rivets holding the chin part, half rings and buckles are covered with the sponge and the soft leather so they don’t come in contact with the wearer’s skin. If you have questions or would like to order please contact me in one of the ways found on CONTACTS page. Locks are not included.

The back of the hand is made of soft leather and the leather straps are sewn from soft and thick leather. It can be bound tight with the drawstring on the back of the hand and the buckle of the strap on the wrist can be locked so the person wearing it cannot take it off. There are D-rings at the tip of the fingers and on the two sides of the wrist. If you have questions or would like to order please contact me in one of the ways found on CONTACTS page. Locks are not included.

I make this piece from soft cowhide. The ankle strap is 3 cm wide, made of two layers of cowhide, the outer layer is thicker, strong leather and the inside is soft but also strong. The toe-to-ankle strap is a layer of thick leather, making it easier to thread into the D-rings. You can use this strap to pinch the foot, but you can unlace it if you aren't using it. The buckles can be locked (The padlocks are not included in the product). I put 5 D-rings on each sock: three for the ankle, one for the heel, one for the toes; this provides countless knitting opportunities. If you have questions or would like to order please contact me in one of the ways found on CONTACTS page.  

The bridle straps are 3 cm wide and made of three layers of leather: on the outside, I put two layers of hot-pink patent leather with folded edges, which I cover with soft pink leather so that it is comfortable and does not stick. You can adjust the length of each strap with a buckle; the buckles can be locked. The visor has the same design as the straps. I made the ear from two layers of soft leather; I put a wire in the folded edge to give it a nice shape. The visor and ears are also removable. The special feature of the bridle - in addition to its color - is the 5 cm long spike placed in the middle of the forehead. Of course, you can also order it in different colors.

If you want to decide when they get to take their shoes off you might want to put a lock on it! 2 and 3 cm (1.1 inch) wide, lockable and you can bind the ankles together with it.

Two soft leather arm restraints with 4 thick leather straps. Each strap has three d-rings of which one is located at the fingers. The tunnels are designed so that the straps and the rings fit through them. Easy to use and the ability to bend the arms is ensured by the soft leather that I used for the elbow area. Its designs makes a number of binding possible such as:

• behind the back with the x-binder.
• It also functions as an arm bag with the x binder and a strap on the wrists (the wrist straps can be taken off while the forearm straps are long enough to clasp both wrists).
• You can bind the arms together behind the person's back or in front.
• If you tie the two rings at the fingers the device becomes a straitjacket.
• The wrist can be tied to the thighs.
• You can bind the arms along the body with straps.
• You can bind the arms to the ankles or to the neck with extra handcuffs.
• The above variations can be multiplied if you add restraints to external objects.

We did not shoot a photo of every possible variation but it's worth checking out all 15 pictures! Prices:

• with the X-strap, thigh and straitjacket straps 200 €
• with the above plus the body straps 239 €

Photo: https://www.facebook.com/FetishExtremePictureBest/ And finally some feedback from a happy customer: “I've used the arm binders a few times since I bought them, and I absolutely love it :) I knew that I needed it the first time I saw it on the shelf. The thick black leather and the massive buckles immediately turned my fantasies on. Upon taking a closer look I noticed that this device is the same high quality as all the others I have bought from this store: everything is cut exactly, all the stitches are precisely parallel, everything is joined perfectly to each other, its a fantastically clean job. Professional bondage device: you can see that the creator puts a lot of thought into the design: not only can you not escape from it, its virtually impossible to move. The potential for variations is especially amazing: you can make someone immobile in a vast number positions whether you bind the arms to the sides or behind the person's back (not to mention the straitjacket position) but combining it with bondage furniture makes for innumerable opportunities to use this device. Domina Hanna http://www.hannabdsm.com

Pony-play bridle with ears, visors, possibly mane: The straps are 3 cm wide, made of two layers of cowhide, of which the outer layer is thicker, strong leather, and the inner is soft but also strong. All buckles can be locked. The visor is a single layer of 4 mm thick cowhide. I designed it to block peripheral vision at any size head. I make the ear out of soft leather; I put wire on the edge for better support. The snaffle is a soft rubber pony snaffle, but you can ask for it with a different mouthpiece or you can send me the piece you want. You can also request a mane made of leather for the strap running from forehead to neck. The price of the bridle without a mane is 176 EUR Model photos: https://www.facebook.com/FetishExtremePictureBest/   Model photos: https://www.facebook.com/FetishExtremePictureBest/ Locks are not included. If you have questions or would like to order please contact me in one of the ways found on CONTACTS page.

The main features of the swing:

• The outer part and the straps holding the D-rings are made of 4 mm thick, one-layer cowhide.
• Inside, I put a 6 mm thick sponge covered with soft cowhide to make it comfortable.
• The D-rings are 50 mm wide, 8 mm thick and welded. Each is held by 6 rivets.
• It supports the body at the thighs, waist and neck.

Sizes: I write the dimensions of the thick leather, the padding is at least 1 cm wider everywhere.

• thigh: 65 cm long, 12 cm wide
• waist: 110 cm long, 18 cm wide
• neck: 60 cm long, 6 cm wide I am also happy to make them in sizes other than these. In this case, ask for a quote.

For hanging, you need 4 or 5 carabiners and the same number of chains. These products are not included.