INTIMATE TOYS FROM QUALITY LEATHER TAILORED FOR INDIVIDUAL NEEDS
It is made of medium thick but soft leather and the nose part keeps its shape thanks to the strong hard leather on the inside of it. There are wires in its ears so you can mould it to the desired shape. The tongue can be fixed to the mask in two lengths with a press-stud or you can take it off if you want. There's also some wire in it so you can decide what shape you want it to take. The design of the nose part makes sure that you can still use its mouth piece. There's a drawstring at the back of the head and the collar can be adjusted with a buckle so you can tie it closely to the head. Also available with a lockable buckle. You can order in three different sizes. Photo: https://www.facebook.com/FetishExtremePictureBest/ Domina: www.szexakademia.com If you have questions or would like to order please contact me in one of the ways found on CONTACTS page. Locks are not included.
This is a stingy spanking device. The “business end” of it is 10x12 cm, made of ox hide and has holes in it. The handle is 38cm long, made of wood that is covered with leather (extra layers for the palm area). Model phot taken: https://www.facebook.com/FetishExtremePictureBest/
These mitts are padded with thick sponge around the hands and thin sponge around the forearms. The mitts are made of leather on both the inside and the outside with an extra long forearm part. It holds the hands tightly via the drawstring wound between the rings and two extra strong lockable leather straps that each have a d-ring as well. The design does not allow its wearer to use their hands: they only fit if the person makes a fist in it. Main photo: https://www.facebook.com/FetishExtremePictureBest/
This collar is 3 cm wide, made of fine leather and has one rows of studs on it. The studs are 55 mm long. The metal parts are covered with leather so people with allergies can wear it too. You can also order with different leathers or with a different stud pattern. Modell: Donna Christina If you have questions or would like to order please contact me in one of the ways found on CONTACTS page.
This muzzle is made of 3cm wide straps with lockable buckles. The chin part is made of strong leather on the outside, and soft leather and extra padding on the inside with lining. Model photo: https://www.facebook.com/FetishExtremePictureBest/
This bracelet consists of 1-1 vertical and 5-5 horizontal straps. Each of these straps is made of two layers of cowhide, the outer layer of which is thick and strong and the inside is soft but also strong. The vertical straps are 4 cm wide and have D-ring on both ends. The horizontal straps are 3 cm wide and can be adjusted with a buckle. I also attach D-rings to the straps so that the arms can be fastened to each other or turned outwards to an external object. I also recommend it for fetish parties where it can be a great accessory for your outfit. Photos taken: https://www.facebook.com/FetishExtremePictureBest/ Mistress: www.szexakademia.com The rope shown in the pictures is not included.
Wrist cuffs made of natural and white cowhide. The main part and the strap 4 mm thick cowhide; the former 7 cm, the latter 3 cm wide. I apply a soft, thick sponge on the inside, and I hide it with soft white cowhide. I sew around the strap and the main part with thick thread. I set a welded D-ring behind the thick, strong buckle. This type of thick, natural skin get darker with use and matures to medium brown. Extremely durable material. Model photos taken: https://www.facebook.com/FetishExtremePictureBest/ You can find the paddle on the pictures here: https://www.leathergirl.eu/termek/natur-bor-paskolo/
Extra strong black leather cuff set with black buckles and D-rings.. Each main part is 6cm wide, made of two layers of thick leather with soft leather and sponge padding on the inside. The straps are 3cm wide and also double layered. The wrist cuffs have 2 welded D-rings, ankle cuffs have 3 welded d-rings. They are available individually as well:
- wrist cuffs: 48 EUR/pair
- ankle cuffs: 52,5 EUR/pair
- collars: 37 EUR/pair
- thigh cuffs: 81 EUR/pair
- set with collar, wrist-, ankle cuffs: 119 EUR/pair
- set wtih collar, wrist-, ankle- and thigh cuffs: 188 EUR/pair
This mask is made of soft black cowhide. You can adjust the size with a lace on the sheepskin lining on the back of the head. In this piece, I put a cotton padding on the eyes and ears. The former prevents the eyes from being open, while the latter prevents external noise from being heard. The mouthpiece is replaceable; it can be fixed with a strap and side loops. For this mask I made three different mouthpieces: a smooth mouthpiece, a gagball mouthpiece and a 5 cm long penis gag mouthpiece. The jaw is designed to open the mouth. All metal parts are black and the three D-rings on the neck are welded. Model Photos :https://www.facebook.com/FetishExtremePictureBest/ If you have questions or would like to order please contact me in one of the ways found on CONTACTS page.
The outside is made of thick leather while the inside is soft leather with soft padding, that can be adjusted to fit with straps and a string. And the most important: the inner and outsides each contain a 3mm thick, 3 cm wide piece of steel (4 pieces altogether) which makes it impossible to bend the legs. It is as if it was bound in plaster. Every strap can be locked and each has 2 welded D rings fitted to the inner and outside of the leg. Photó: https://www.facebook.com/FetishExtremePictureBest/
This dog head is made from a single layer of 2.5-3 mm thick cowhide. I cut the whole face piece in one piece and shape it with rivets. You can open the mouth with the press-studs on the chin, or you can remove the entire chin. I put wire around the edge of the tongue so you can control its shape; and the press-studs allow you to use, remove or adjust the length of your choice. All the metal parts on this piece are black to blend into the leather as much as possible, but of course you can also order with nickel parts. If you have questions or would like to order please contact me in one of the ways found on CONTACTS page.
Leather face mask removable, cleanable, with two layers of linen. The leather also has two layers: outside cowhide and inside soft sheepskin. I put a wire on top of the nose to adjust it to the shape of the face. Two collapsible rubber straps help attach the mask to the head. It's interior design allows you to put a surgical mask inside instead of the original canvas insert, or even wear it without lining. You can use it as a protective gear during coronavirus, and later on for cycling, motoring ... And a great accessory for fetish parties. You can order more colors. The price quoted refers to the smooth design. The cost of riveted designs is 49EUR.
I DESIGNED THIS DOG HARNESS TO BE USED ONLY AS A FOOT BINDING AND ALSO AS A BUCKLE BINDING THE WHOLE BODY. The extra dog harness includes: The outer layer of the knees and elbows is 2 mm thick cowhide, which is sewn with anti-slip rubber on the “walking surface”. The inner side is lined with 12 mm thick sponge and soft cowhide. Thanks to the one-piece joint protectors, there is no part that pushes the knees or elbows. Stable attachment is ensured by a 3 cm wide two-layer leather strap around the upper edges. The lateral sliding of the limbs is prevented by the 4-4 straps connecting the joint protectors to the foot and arm. Those part, which fixed the upper part of the leg, with the thigh, and the forearm on the upper arm, is also covered with a 2 mm thick cowhide and a 3 mm thick sponge with a soft cow lining. At the same time, the lining also covers the rivets that secure the straps and buckles to the outside. The size of this can be adjusted to the desired tightness with the two-sided lacing and the two-layer leather strap around the top. The foot section consists of two adjustable length straps lined with sponge and soft leather and a stably fastened D-ring. The strap running through the heels keeps the knees and legs at the right height. The strap on the foot prevents the heel strap from sliding backwards when using the full body harness. A half ring placed in the center of the heel strap secures the body straps of the entire harness. I make soft but strong cowhide gloves. You can attach it to the forearm with an adjustable strap. This strap is attached to the body straps, tucked through the guides on the headpiece and the D-ring at the end of the sleeves. You can also strap wrist straps to prevent them from slipping. You can use gloves as an independent toy. The straps are made of two layers of cowhide everywhere, the outer layer of which is ca. 2mm thick, strong cowhide, and the inside is soft but also strong cowhide. Behind the thick, massive buckles, I riveted hand-sewn leather loops everywhere, and, where necessary, made a sliding loop. Each strap is adjustable in length, allowing the harness to be precisely sized. This model is adjustable up to S-XXXL size, but of course I am happy to make a different size (in this case the price may vary). You can also order with nickel and black metal parts. The gloves and headbands shown in the pictures are not included in the price, you can order them separately. You can find the sponged fist mitts here, the long fist here, the muzzle here, the dog head harness here and the dog's head here. Photo: https://www.facebook.com/FetishExtremePictureBest/ Domina: https://www.facebook.com/inkedluca/