Description comming soon. If you have questions or would like to order please contact me in one of the ways found on CONTACTS page.

The outside is made of thick leather while the inside is soft leather with soft padding, that can be adjusted to fit with straps and a string. And the most important: the inner and outsides each contain a 3mm thick, 3 cm wide piece of steel (4 pieces altogether) which makes it impossible to bend the legs. It is as if it was bound in plaster. Every strap can be locked and each has 2 welded D rings fitted to the inner and outside of the leg. Photó: https://www.facebook.com/FetishExtremePictureBest/

White leather lockable ankle cuffs.   The whole cuffs is made of soft leather and has sponge padding. The straps are 3 cm wide and are made of three layers of leather. They hold 3 welded d-rings. It can be locked with a special buckle or cotter pin.

Two soft leather arm restraints with 4 thick leather straps. Each strap has three d-rings of which one is located at the fingers. The tunnels are designed so that the straps and the rings fit through them. Easy to use and the ability to bend the arms is ensured by the soft leather that I used for the elbow area. Its designs makes a number of binding possible such as:

• behind the back with the x-binder.
• It also functions as an arm bag with the x binder and a strap on the wrists (the wrist straps can be taken off while the forearm straps are long enough to clasp both wrists).
• You can bind the arms together behind the person's back or in front.
• If you tie the two rings at the fingers the device becomes a straitjacket.
• The wrist can be tied to the thighs.
• You can bind the arms along the body with straps.
• You can bind the arms to the ankles or to the neck with extra handcuffs.
• The above variations can be multiplied if you add restraints to external objects.

We did not shoot a photo of every possible variation but it's worth checking out all 15 pictures! Prices:

• with the X-strap, thigh and straitjacket straps 200 €
• with the above plus the body straps 239 €

Photo: https://www.facebook.com/FetishExtremePictureBest/ And finally some feedback from a happy customer: “I've used the arm binders a few times since I bought them, and I absolutely love it :) I knew that I needed it the first time I saw it on the shelf. The thick black leather and the massive buckles immediately turned my fantasies on. Upon taking a closer look I noticed that this device is the same high quality as all the others I have bought from this store: everything is cut exactly, all the stitches are precisely parallel, everything is joined perfectly to each other, its a fantastically clean job. Professional bondage device: you can see that the creator puts a lot of thought into the design: not only can you not escape from it, its virtually impossible to move. The potential for variations is especially amazing: you can make someone immobile in a vast number positions whether you bind the arms to the sides or behind the person's back (not to mention the straitjacket position) but combining it with bondage furniture makes for innumerable opportunities to use this device. Domina Hanna http://www.hannabdsm.com

Black lockable leather ankle cuffs with blue lining. The construction of these 6 cm (2.3 inch) wide cuffs is similar to the others: the outside of the main body is thick strong reinforced leather while the inside is soft leather and sponge padding to ensure comfortable wear. The lining leather on the inside stops at the edge of the sponge so its not noticeable during use. The straps are made of two layers of 3 cm (1.1 inch) leather and 3 welded d-rings are added for extra restraint.

Red leather lockable ankle cuffs. The whole cuffs is made of soft leather and has sponge padding. The straps are 3 cm wide and are made of three layers of leather. They hold one welded d-rings. It can be locked with a special buckle. The main part is 6 cm wide, and it is made of two layers of leather. If you have questions or would like to order please contact me in one of the ways found on CONTACTS page. Locks are not included.

This leg band consists of 4-4 vertical and 7-7 horizontal straps. The straps are each made of two layers of cowhide, the outside of which is thick and strong, and the inside of which is soft but also strong leather. The vertical straps are 4 cm wide and I put welded D-rings to each end, a total of 16 pieces. The horizontal straps are 3 cm wide and their length can be adjusted with a buckle. I also attach welded D-rings to the connection of the straps, a total of 28 pieces. All of these provide countless tying options. The bandage also includes a waist belt and a total of 6 connecting straps, which prevent the individual parts from slipping off. These connecting straps are made of one layer of leather so that they can be easily bent. Model photó: https://www.facebook.com/FetishExtremePictureBest/ Domina: www.szexakademia.com

The gag ball is 40mm wide and is made of medical silicone. The straps are made of two layers of leather: the outside is strong and thick while the inside is soft for comfortable use and the buckle can be locked. If you have questions or would like to order please contact me in one of the ways found on CONTACTS page. Locks are not included.

Black leather lockable ankle cuffs. The outside of the main part - 6 cm (2.3 inch) wide – is made of thick strong reinforced leather, while the inside is made of soft   leather and sponge padding for comfort. The 3 cm (approx 1 inch) straps are made of two layers of thick leather for solid hold. It can be locked with a special buckle or cotter pin.

General characteristics of the bandages: The straps are each two layers of cowhide, the outside of which is thick and strong, and the inside of which is soft but also strong of leather. The vertical straps are 4 cm wide and I put a welded D-ring to both ends. The horizontal straps are 3 cm wide and their length can be adjusted with a buckle. I also attach welded D-rings to the connection of the straps. All of these provide countless tying options. Parts of the set:

• A pair of arm bindings consisting of 1-1 vertical and 5-5 horizontal straps. The total number of welded D-rings is 14.
• A pair of leg bindings consisting of 4-4 vertical and 7-7 horizontal straps. The total number of welded D-rings is 44.
• 1 waist belt with two sliding D-rings
• 6 connecting straps that prevent the individual parts from slipping off. These connecting straps are made of one layer of leather so that they can be easily bent.
• 1 X-connector
• 4 pcs double carabiner

Model photo: https://www.facebook.com/FetishExtremePictureBest/ Domina: https://www.szexakademia.com/

The back of the hand is made of soft leather and the leather straps are sewn from soft and thick leather. It can be bound tight with the drawstring on the back of the hand and the buckle of the strap on the wrist can be locked so the person wearing it cannot take it off. There are D-rings at the tip of the fingers and on the two sides of the wrist. If you have questions or would like to order please contact me in one of the ways found on CONTACTS page. Locks are not included.

Parts of the harness: - 1 piece of 4 cm wide waist belt with a D-ring at the back with buckle pad, - 1 pair of 4 cm wide thigh strap with buckle pad, - 1 pair of extra strong wrist cuffs, - 4 connecting straps made of one layer of cowhide, - 2 connecting carabiners. The waist belt, thigh straps, the main part of the handcuffs and the strap are made of two layers of leather, the outer layer is 1.5-2 mm thick and strong, and the inner is soft but also strong cowhide. I sew sponges and soft leather on the inside of the cuff to make it comfortable to wear. The harness without wrist cuffs is 102€. If you have questions or would like to order please contact me in one of the ways found on CONTACTS page.

A neck brace that holds the chin and neck from all sides. Thick cowhide on the outside and soft but also strong cowhide on the inside, with a thin layer of sponge between the two to make it as comfortable as possible. The hem on this piece is white leather, but you can order it in other colors (I currently have black, white, red and brown leather). I put welded D-rings on the front and on both sides. You can adjust its length with 2 pieces of 3 cm wide lockable buckles. The rivets holding the chin part, half rings and buckles are covered with the sponge and the soft leather so they don’t come in contact with the wearer’s skin. If you have questions or would like to order please contact me in one of the ways found on CONTACTS page. Locks are not included.

These extra strong ankle cuffs are made of black leather with welded d-rings. The main body is 6 cm (2.3 inch) wide made of two layers of thick leather. The inside is made of soft leather and sponge padding for comfort. The strap is 3 cm (1.1 inch) wide, also made of two layers of thick leather.

Black lockable leather ankle cuffs with white lining. The construction of these 6 cm (2.3 inch) wide cuffs is similar to the others: the outside of the main body is thick strong reinforced leather while the inside is soft leather and sponge padding to ensure comfortable wear. The lining leather on the inside stops at the edge of the sponge so its not noticeable during use. The straps are made of two layers of 3 cm (1.1 inch) leather and 3 welded d-rings are added for extra restraint.

The main body is 6 cm (2.3 inches) wide with 2 cm (1.1 inch) wide straps. The outside is thick strong leather while the inside is covered with soft leather and sponge padding is added for comfort.

A neck brace that holds the chin and neck from all sides. It is 1.5-2 mm thick, strong on the outside and soft but also strong cowhide on the inside, with a thin layer of sponge between the two to make it as comfortable as possible. The hem on this piece is black leather, but you can order it in other colors (I currently have red, white and blue leather). I put welded D-rings on the front and on two sides. You can adjust the length with 2 pieces of 3 cm wide lockable buckles. The rivets holding the chin, D-rings and buckles are covered with sponge and soft leather so that they do not come in contact with the wearer's skin. If you have questions or would like to order please contact me in one of the ways found on CONTACTS page. Locks are not included.

Black lockable leather ankle cuffs with red lining. The construction of these 6 cm (2.3 inch) wide cuffs is similar to the others: the outside of the main body is thick strong reinforced leather while the inside is soft leather and sponge padding to ensure comfortable wear. The lining leather on the inside stops at the edge of the sponge so its not noticeable during use. The straps are made of two layers of 3 cm (1.1 inch) leather and 3 welded d-rings are added for extra restraint. If you have questions or would like to order please contact me in one of the ways found on CONTACTS page. Locks are not included.

Compared to the tying socks presented earlier, this is a much more complicated, and therefore more time-consuming design. The end result, however, speaks for itself. It follows the shape of the foot much more precisely and is much more comfortable to wear thanks to the 5 mm thick polyfoam and buttery soft cowhide material built into the sole. The closure is provided by a removable strap attached to the ankle and a zipper sewn into the top; both can be locked. I sew a pad made of sheepskin under the zipper. On the ankle strap 3 and on the toes 1 welded D-ring allows several types of tying. Locks are not included. Model photo: https://www.facebook.com/FetishExtremePictureBest/  

Description comming soon. If you have questions or would like to order please contact me in one of the ways found on CONTACTS page.

Ankle cuff made of 4 mm thick medium brown cowhide with welded D-ring. The main part is 6 cm and the strap is 3 cm wide, made of one layer of thick cowhide. I put a thick sponge covered with soft leather on the inside. I sew around the strap and the main part with thick thread. The three D-rings attached behind the buckle are welded. You can also request it with a nickel or lockable buckle.