Set your main menu in Appearance > Menus

Search
Search

LEG RESTRAINT AND FULL DOG HARNESS, EXTRA DESIGN

Return to Previous Page

Product Description

[:hu]BŐR KUTYAFEJ[:en]LEATHER DOG HEAD[:] 173 EUR
[:hu]KUTYA FEJHÁM HOSSZÚ ORRAL[:en]DOG HEAD HARNESS WITH LONG NOSE[:] 118 EUR

667 EUR

I DESIGNED THIS DOG HARNESS TO BE USED ONLY AS A FOOT BINDING AND ALSO AS A BUCKLE BINDING THE WHOLE BODY.

The extra dog harness includes:

The outer layer of the knees and elbows is 2 mm thick cowhide, which is sewn with anti-slip rubber on the “walking surface”. The inner side is lined with 12 mm thick sponge and soft cowhide. Thanks to the one-piece joint protectors, there is no part that pushes the knees or elbows. Stable attachment is ensured by a 3 cm wide two-layer leather strap around the upper edges. The lateral sliding of the limbs is prevented by the 4-4 straps connecting the joint protectors to the foot and arm.

Those part, which fixed the upper part of the leg, with the thigh, and the forearm on the upper arm, is also covered with a 2 mm thick cowhide and a 3 mm thick sponge with a soft cow lining. At the same time, the lining also covers the rivets that secure the straps and buckles to the outside. The size of this can be adjusted to the desired tightness with the two-sided lacing and the two-layer leather strap around the top.

The foot section consists of two adjustable length straps lined with sponge and soft leather and a stably fastened D-ring. The strap running through the heels keeps the knees and legs at the right height. The strap on the foot prevents the heel strap from sliding backwards when using the full body harness. A half ring placed in the center of the heel strap secures the body straps of the entire harness.

I make soft but strong cowhide gloves. You can attach it to the forearm with an adjustable strap. This strap is attached to the body straps, tucked through the guides on the headpiece and the D-ring at the end of the sleeves. You can also strap wrist straps to prevent them from slipping. You can use gloves as an independent toy.

The straps are made of two layers of cowhide everywhere, the outer layer of which is ca. 2mm thick, strong cowhide, and the inside is soft but also strong cowhide. Behind the thick, massive buckles, I riveted hand-sewn leather loops everywhere, and, where necessary, made a sliding loop. Each strap is adjustable in length, allowing the harness to be precisely sized. This model is adjustable up to S-XXXL size, but of course I am happy to make a different size (in this case the price may vary).

You can also order with nickel and black metal parts.

The gloves and headbands shown in the pictures are not included in the price, you can order them separately. You can find the sponged fist mitts here, the long fist here, the muzzle here, the dog head harness here and the dog’s head here.

Photo: https://www.facebook.com/FetishExtremePictureBest/

Domina: https://www.facebook.com/inkedluca/

Kedvencekhez
Categories: ,

Description

I DESIGNED THIS DOG HARNESS TO BE USED ONLY AS A FOOT BINDING AND ALSO AS A BUCKLE BINDING THE WHOLE BODY.

The extra dog harness includes:

The outer layer of the knees and elbows is 2 mm thick cowhide, which is sewn with anti-slip rubber on the “walking surface”. The inner side is lined with 12 mm thick sponge and soft cowhide. Thanks to the one-piece joint protectors, there is no part that pushes the knees or elbows. Stable attachment is ensured by a 3 cm wide two-layer leather strap around the upper edges. The lateral sliding of the limbs is prevented by the 4-4 straps connecting the joint protectors to the foot and arm.

Those part, which fixed the upper part of the leg, with the thigh, and the forearm on the upper arm, is also covered with a 2 mm thick cowhide and a 3 mm thick sponge with a soft cow lining. At the same time, the lining also covers the rivets that secure the straps and buckles to the outside. The size of this can be adjusted to the desired tightness with the two-sided lacing and the two-layer leather strap around the top.

The foot section consists of two adjustable length straps lined with sponge and soft leather and a stably fastened D-ring. The strap running through the heels keeps the knees and legs at the right height. The strap on the foot prevents the heel strap from sliding backwards when using the full body harness. A half ring placed in the center of the heel strap secures the body straps of the entire harness.

I make soft but strong cowhide gloves. You can attach it to the forearm with an adjustable strap. This strap is attached to the body straps, tucked through the guides on the headpiece and the D-ring at the end of the sleeves. You can also strap wrist straps to prevent them from slipping. You can use gloves as an independent toy.

The straps are made of two layers of cowhide everywhere, the outer layer of which is ca. 2mm thick, strong cowhide, and the inside is soft but also strong cowhide. Behind the thick, massive buckles, I riveted hand-sewn leather loops everywhere, and, where necessary, made a sliding loop. Each strap is adjustable in length, allowing the harness to be precisely sized. This model is adjustable up to S-XXXL size, but of course I am happy to make a different size (in this case the price may vary).

You can also order with nickel and black metal parts.

The gloves and headbands shown in the pictures are not included in the price, you can order them separately. You can find the sponged fist mitts here, the long fist here, the muzzle here, the dog head harness here and the dog’s head here.

Photo: https://www.facebook.com/FetishExtremePictureBest/

Domina: https://www.facebook.com/inkedluca/

If you have questions or would like to order please contact me in one of the ways found on CONTACTS page.

Related Products
EXTRA DOG LEG RESTRAINT
Extra leggings are provided by: The outer layer of the knee section is 2 mm thick cowhide, which is sewn on the “tread” with non-slip rubber. The inside is lined with a 12 mm thick sponge and soft cowhide. Thanks to the one-piece knee guard, there is no part that presses the knee. A 3 cm wide, two-layer leather strap wraps around the upper edge for a stable attachment. The outside of the leg joining the thigh is also 2 mm thick cowhide and inside is 3 mm thick sponge and soft cowhide lining. The lining also covers the rivets that fasten the straps and buckles to the outside. You can adjust the size to the desired tightness with the corset on both sides or the two-layer leather strap around the top. The ankle grip is shaped like my cuffs in general: the 6 cm wide main body is covered with thick leather on the outside, lined with 3mm sponge and soft leather. The outer strap is 3 cm wide and has two layers of leather. I make the strap on the sole more comfortable with a 3mm thick sponge and soft leather. Each part of the harness is adjustable in size, making it almost any size. The design ensures comfortable wearing for hours on end. Model photos taken: https://www.facebook.com/FetishExtremePictureBest/ Mistress: www.szexakademia.com
309 EUR
,
strap muzzle
Similar to muzzles designed for dogs, this piece is also made up of straps. Each strap is double layered of which the outer layer is strong and thick, the inside is softer for comfort. It can be secured to the head with a strap that goes around the top of the head and one that goes around the neck. The buckles can be locked. If you have questions or would like to order please contact me in one of the ways found on CONTACTS page.
115 EUR
, , ,
long fist mitts
These mitts are padded with thick sponge around the hands and thin sponge around the forearms. The mitts are made of leather on both the inside and the outside with an extra long forearm part. It holds the hands tightly via the drawstring wound between the rings and two extra strong lockable leather straps that each have a d-ring as well. The design does not allow its wearer to use their hands: they only fit if the person makes a fist in it. Main photo: https://www.facebook.com/FetishExtremePictureBest/  
161,5 EUR
FULL DOG HARNESS, EXTRA DESIGN
The extra dog harness includes: The outer layer of the knees and elbows is 2 mm thick cowhide, which is sewn with anti-slip rubber on the “walking surface”. The inner side is lined with 12 mm thick sponge and soft cowhide. Thanks to the one-piece joint protectors, there is no part that pushes the knees or elbows. Stable attachment is ensured by a 3 cm wide two-layer leather strap around the upper edges. The lateral sliding of the limbs is prevented by the 4-4 straps connecting the joint protectors to the foot and arm. Those part, which fixed the upper part of the leg, with the thigh, and the forearm on the upper arm, is also covered with a 2 mm thick cowhide and a 3 mm thick sponge with a soft cow lining. At the same time, the lining also covers the rivets that secure the straps and buckles to the outside. The size of this can be adjusted to the desired tightness with the two-sided lacing and the two-layer leather strap around the top. The "socks" are soft but strong cowhide. The strap guides on the top and bottom of the foot and the welded D-rings attached to the toes and heel allow you to fasten the foot either in a pinch or in normal position. I put a thin sponge underneath the D-ring at the toes, to prevent the strap running there. You can also tie these two D-rings with an extra strap. The ankle strap is also held in place by belt guides. You can attach the socks to the leg with an adjustable length strap. The link is designed so that the socks can be used as a separate toy, regardless of the dog harness. I also make soft but strong cowhide gloves. Like the sock section, you can attach it to the forearm with an adjustable strap. This strap is attached to the body straps, tucked through the guides on the headpiece and the D-ring at the end of the sleeves. You can also strap wrist straps to prevent them from slipping. Like socks, you can use gloves as an independent toy. The straps are made of two layers of cowhide everywhere, the outer layer of which is ca. 2mm thick, strong cowhide, and the inside is soft but also strong cowhide. Behind the thick, massive buckles, I riveted hand-sewn leather loops everywhere, and, where necessary, made a sliding loop. Each strap is adjustable in length, allowing the harness to be precisely sized. This model is adjustable up to S-XXL size, but of course I am happy to make a different size (in this case the price may vary).
667 EUR
,
HARNESS WITH DRAGON-SPINE
Each strap of the showy harness is made of two layers of cowhide, of which the outer layer is 1.5-2 mm thick, strong cowhide, and the inner one is soft, but also strong. The strap at the spine line is 4 cm wide, the shoulder and body straps, as well as the rounded straps holding the D-rings, are 3 cm wide. You can adjust the length of the body straps with a buckle. All rings and D-rings are welded.
187,3 EUR
,
DOG HEAD HARNESS
Dog head harness with nose, tongue, gagball and buckles that can be locked: The straps are 3 cm wide and are made of two layers of cowhide, the outer layer being thicker, strong leather and the inner layer soft but also strong. The ears are made of soft leather and I put wire around the edges so you can fold it as you like. The nose is soft on the outside and moderately thick on the inside to help maintain its shape. I work the mouth opening and the edge with seam. The height of the mouth opening is designed so that the mouth remains usable. You can patent or remove the "dog" tongue for two lengths. The gagball is also a patent-lockable 40mm diameter medical silicone. All buckles can be locked. (The padlock shown in the pictures is not included)
118 EUR
LEATHER DOG HEAD
This dog head is made from a single layer of 2.5-3 mm thick cowhide. I cut the whole face piece in one piece and shape it with rivets. You can open the mouth with the press-studs on the chin, or you can remove the entire chin. I put wire around the edge of the tongue so you can control its shape; and the press-studs allow you to use, remove or adjust the length of your choice. All the metal parts on this piece are black to blend into the leather as much as possible, but of course you can also order with nickel parts. Model photo: https://www.facebook.com/FetishExtremePictureBest If you have questions or would like to order please contact me in one of the ways found on CONTACTS page.
173 EUR
DOG HEAD HARNESS WITH LONG NOSE
Dog head harness with nose, tongue and buckles that can be locked: The straps are 3 cm wide and are made of two layers of cowhide, the outer layer being thicker, strong leather and the inner layer soft but also strong. The ears are made of soft leather and I put wire around the edges so you can fold it as you like. The nose is soft on the inside and moderately thick on the outside to help maintain its shape. I work the mouth opening and the edge with seam. The height of the mouth opening is designed so that the mouth remains usable. You can patent or remove the “dog” tongue for two lengths. All buckles can be locked. (The padlock shown in the pictures is not included) Photo: https://www.facebook.com/FetishExtremePictureBest/ Dog harness
118 EUR
,
knee and elbow protector
The outside is made of thick strong leather while the inside is padded with sponge and covered with soft leather so it protects the joints when walking. There is a piece of non-slippery rubber on the “walking part” to prevent injury. They can be fastened to the limbs with 2 leather straps, each 3 cm wide. There is also a piece of leather under the buckles so it doesn't tear into the skin. The angle of inclination can be adjusted with the buckles on the side. You can also order them as pairs:
  • elbow protector: 92,4 €/pair
  • knee protector: 112,4 €/pair
If you have questions or would like to order please contact me in one of the ways found on CONTACTS page.
185,5 EUR
,
HOT PINK UNICORN BRIDLE
The bridle straps are 3 cm wide and made of three layers of leather: on the outside, I put two layers of hot-pink patent leather with folded edges, which I cover with soft pink leather so that it is comfortable and does not stick. You can adjust the length of each strap with a buckle; the buckles can be locked. The visor has the same design as the straps. I made the ear from two layers of soft leather; I put a wire in the folded edge to give it a nice shape. The visor and ears are also removable. The special feature of the bridle - in addition to its color - is the 5 cm long spike placed in the middle of the forehead. Of course, you can also order it in different colors.
193 EUR
,
dog mask
It is made of medium thick but soft leather and the nose part keeps its shape thanks to the strong hard leather on the inside of it. There are wires in its ears so you can mould it to the desired shape. The tongue can be fixed to the mask in two lengths with a press-stud or you can take it off if you want. There's also some wire in it so you can decide what shape you want it to take. The design of the nose part makes sure that you can still use its mouth piece. There's a drawstring at the back of the head and the collar can be adjusted with a buckle so you can tie it closely to the head. Also available with a lockable buckle. You can order in three different sizes. Photo: https://www.facebook.com/FetishExtremePictureBest/ Domina: www.szexakademia.com
183,3 EUR
,
FLOGGER WITH 100 LEATHER TAILS (RED AND BLACK STYLE)
I made this whip from 50 half-fold, medium-thick, hard cowhide fibers (25 black and 25 red). The “effective length” of the leather fibers is about 50 cm. The handle is wrapping with soft leather and covering it with a soft leather strap. The handle has a total length of about 20 cm. I put a 3 cm wide welded D-ring around the center of the leather strips, which can be handy during use and makes storage easier. If you have questions or would like to order please contact me in one of the ways found on CONTACTS page.
106,7 EUR
,
MUZZLE MADE OF RED&BLACK LEATHER
I make this muzzle entirely by combining black and red leathers: - the black part is medium-thick, firm, strong cowhide everywhere, - the red parts are also made of cowhide, but soft. I fold them into two layers under the straps, and they have one layer inside the mouthpiece and collar. You can adjust the length of each strap with a lockable buckle (padlocks are not included in the product). I put a welded D-ring on the top of the head, under the chin and on the collar, for a total of six pieces. You can use the collar separately or in conjunction with the muzzle. If you have questions or would like to order please contact me in one of the ways found on CONTACTS page. Locks are not included.
228 EUR
,
CUFF SET WITH WHITE LINING
Black leather lockable cuffs lined with white leather. Their construction is the same as the other sets: the outside is thick, reinforced leather, the inside is soft leather with additional padding. They are 6cm wide. The leather lining on the inside stops at the edge of the sponge to avoid discomfort during use. The straps are made of two layers of 3 cm (1.1 inch) leather and multiple welded d-rings are added for extra restraint. The buckles are lockable, but the locks are not included. Can be lined with different base colors upon request (in case of ordering a set). They can also be bought individually: wrist cuffs ankle cuffs collar
222 EUR
,
LEG BRACE
The outside is made of thick leather while the inside is soft leather with soft padding, that can be adjusted to fit with straps and a string. And the most important: the inner and outsides each contain a 3mm thick, 3 cm wide piece of steel (4 pieces altogether) which makes it impossible to bend the legs. It is as if it was bound in plaster. Every strap can be locked and each has 2 welded D rings fitted to the inner and outside of the leg. Photó: https://www.facebook.com/FetishExtremePictureBest/
485 EUR
,
Arm bondage made of straps
This bracelet consists of 1-1 vertical and 5-5 horizontal straps. Each of these straps is made of two layers of cowhide, the outer layer of which is thick and strong and the inside is soft but also strong. The vertical straps are 4 cm wide and have D-ring on both ends. The horizontal straps are 3 cm wide and can be adjusted with a buckle. I also attach D-rings to the straps so that the arms can be fastened to each other or turned outwards to an external object. I also recommend it for fetish parties where it can be a great accessory for your outfit. Photos taken: https://www.facebook.com/FetishExtremePictureBest/ Mistress: www.szexakademia.com The rope shown in the pictures is not included.
104 EUR

© 2016

Készítette NT-IT StudiÓ Minden Jog Fenntartva - LeatherGirl.eu © 2016-

 


Már felirkozott? Változtatni szeretne vagy lemondaná? esetleg változott E-mail címe?.



Kérem, hogy létező E-mail címet adjon meg:





\r\n
    •  Akciók

    •  Általános

    •  KORBÁCSOK - EGYÉB

    •  SZÖGESEK

    •  PETPLAY

    •  HÁMOK

    •  KÖTÖZÉS

    •  Bilincsek



 

code


 

 

 

18_v3

Ez a funkció nem elérhető!
close